This product currently only operates in Japan. If you're interested, please get in touch using the button below.
Updates that involve a reboot, such as software updates, are carried out within a maintenance window that you specify in advance (a maintenance period defined by day of the week, time, and duration).
This means updates can be applied outside business hours.
No, you do not need to arrange a replacement yourself. When the hardware becomes outdated, we will arrange a newer-generation unit on your behalf.
Since configuration data is managed in the cloud, simply reconnecting the cables applies the same settings as before automatically.
This removes the effort and cost of deciding when to replace equipment, procuring it, disposing of the old unit, and reconfiguring it, allowing you to keep an up-to-date network at all times.
We support Internet Multifeed (transix), JPIX (v6 Plus), Asahi Net (v6 Connect), Arteria Networks (XPass), and BBIX (OCX Hikari). Support for other VNEs and the domestic standard provisioning method HB46PP is also planned.
Yes. Configuration is normally carried out through the cloud management console (GUI), so you can deploy and operate the product without specialist knowledge of the command line (CLI).
What you enter is automatically generated as a JSON configuration, and you can also edit the JSON directly if required.
The product is designed to make initial setup and day-to-day operation as simple as possible, and if you have concerns about deployment, support from a sales partner can also be arranged.
The service is intended for use within Japan's au 4G LTE coverage area. Depending on signal conditions, the connection may become unstable in mountainous areas, basements, deep inside buildings, and similar locations. Please check the signal conditions at the installation site before deployment. Outside the au coverage area, a docomo connection can also be arranged — please contact us to discuss.
For typical business use, we expect around 100 to 200 simultaneous connections.
Multi-WAN and failover functionality are planned for future support.
We are progressively adding support for the major methods MAP-E, DS-Lite, and IPIP6. At present, we have confirmed compatibility with transix (Internet Multifeed), V6 Plus (JPIX), OCX Hikari (BBIX), XPass (Arteria Networks), and V6 Connect (Asahi Net).
The product supports standard internet connections. However, if you use IPv4 over IPv6, compatibility depends on the method provided by your ISP or VNE operator. ZUNDA CONNECT ROUTER supports the major methods MAP-E, DS-Lite, and IPIP6. PPPoE is also supported.
Mainly office environments with a few dozen to a few hundred people. It is optimised for site-based use rather than individual use.
In the event of a fault, we will replace the unit. The cost of replacement is included in the monthly fee, so no additional charge applies.
Because configuration data is managed in the cloud, simply reconnecting the cables to the replacement unit restores the settings automatically, with no need to reconfigure anything.
We have no plans to implement UTM-equivalent functionality that performs detailed traffic inspection such as DPI or application-level analysis. In line with today's environment, where end-to-end encrypted communication has become the norm, we place greater emphasis on route design, authentication, and traffic control than on traffic inspection. Our consulting team can provide a modern security design tailored to ZUNDA CONNECT ROUTER.
Yes. It supports network segmentation by zone and the configuration of traffic rules. It is designed to allow separate business, guest, and management zones to be configured for secure operation.
We do not offer a user-facing VPN access feature that lets general users connect into the internal network from outside. Remote access is left to dedicated platforms such as Cloudflare, SASE, or ZTNA, and the router is designed so that it never becomes an entry point from outside.
No, it cannot. Management traffic from ZUNDA CONNECT, the cloud-based management platform, to ZUNDA CONNECT ROUTER uses a dedicated, closed mobile connection that is separate from the internet. It is designed so that no management port is ever exposed on the WAN side.
No, you do not. There is no need to open a management port on the WAN side to manage the router. Rather than creating a login entry point from the internet, management is carried out through a closed management path.
Yes. We support site-to-site VPN, which securely connects sites such as head offices, branches, shops, and factories to one another.
WireGuard and IPSec/IKEv2 are both supported, and the measured throughput figures are as follows.
We recommend using WireGuard, as it is faster, has lower overhead, and offers simpler key management. Our managed mesh VPN automatically connects multiple sites in a full mesh, and adding new sites can also be managed centrally from the cloud.
We support audit logs for all operations, searching of device logs, and retrieval of emergency logs.
Logs are retained for 30 days.
Yes. Settings are version-controlled in the cloud, so you can review the change history and roll back to a previous configuration.
Before any change is applied, the server validates the structure and consistency of the configuration, and flags the relevant section if there is a problem. This lets you make configuration changes with confidence.
Yes, it is. Management traffic for this product uses a dedicated, closed mobile connection (4G) that is independent of the WAN line.
This means that even if there is a fault on the WAN side, a configuration error, or the device has just been installed and is not yet connected to the internet, you can still correct settings, roll back to a previous configuration, and investigate the cause remotely from the cloud (out-of-band management).
With typical remote management that runs over the WAN line, losing WAN connectivity also means losing the management path itself, requiring an on-site visit. This product is unaffected by that issue and can be recovered without anyone needing to visit the site.
In standard support, we investigate the cause using the configuration data and logs synchronised to the cloud. We do not log in to the device directly to operate it.
We do not change settings for support purposes without the customer's consent. Even when a fault needs addressing or a configuration change needs applying, this is carried out through a strict privileged-access management system and procedure.
You can log in to ZUNDA CONNECT using your ZUNDA ID. You can select each device to change settings, restart it, or update its firmware. ZUNDA ID can also be integrated with your own IdP.
Yes. Important software updates, such as those addressing vulnerabilities, are applied continuously as part of the managed service. This prevents updates from being neglected and known vulnerabilities from being left unpatched. Updates are enforced within a pre-configured maintenance window.
This product is designed for business use in offices, data centres, and similar environments, but we do not restrict sales to corporate customers only. The product's characteristics (licensing model, management features, noise levels, electromagnetic interference, advertising displays, etc.) are not intended for use in an ordinary household. Please consider these factors before making a purchase.
No additional fee is charged. The cloud management feature (ZUNDA CONNECT) is included as standard in the monthly fee.
Even as the number of sites increases, no additional licence fee is incurred for the management feature itself, and multiple sites can be managed centrally together.
If you compare unit prices alone, it may look more expensive, but the monthly fee covers not just the hardware itself but also maintenance support, equipment replacement in the event of a fault, software updates, the cloud management feature, and the dedicated management mobile connection.
With a one-off purchase, the following costs typically arise separately.
As all of these are included in the monthly fee for this product, we recommend comparing on the basis of total cost of ownership across the whole operation. Another benefit is that no unexpected additional costs arise.
All prices shown on this site are listed exclusive of tax. Consumption tax will be added separately at the time of billing.
Yes, we are compliant. We are registered as a qualified invoice issuer and will issue invoices that meet the requirements of the system.
If you purchase directly from us, you can pay monthly by credit card or bank transfer (invoice). If you purchase the device and an annual usage licence from a retailer other than us, please discuss payment methods (such as credit terms or leasing) directly with that retailer.
There is no minimum usage period or minimum contract term. The service can be used on a monthly basis.
However, if you cancel within one month of starting the service, one month's usage fee will be charged.
As this is a subscription service, we expect the equipment to be returned upon cancellation. This may vary depending on the contract terms or if the service is provided through a partner.
If you contract directly with ZUNDA, the product is provided as a subscription service, so you will need to return the equipment upon cancellation. If you contracted through a retailer, please contact that retailer.
There are no initial costs. The product is provided as a subscription service.
ZUNDA CONNECT ROUTER is provided as a monthly subscription service (¥15,000/month) that includes the hardware unit and the cloud management feature.
The monthly fee includes the ZUNDA CONNECT ROUTER unit itself, the cloud management feature, the dedicated management mobile connection, software updates, and maintenance support. A 19-inch rack-mount bracket is also included.
We expect contracts to be tailored to the number of units and scale of use. If you are considering use across multiple sites or a phased rollout, please contact us individually to discuss. If you would like to handle the product on an ongoing basis as a sales partner, separate terms can also be discussed.
The NAT table supports up to 1,000,000 sessions.
This product is fitted with a large amount of RAM, and has been designed with plenty of headroom for session capacity.
Yes. Once power is restored, the device starts up automatically and resumes operation using the settings managed in the cloud.
Simply having a 10GbE port does not, on its own, deliver an effective 10Gbps. In real office networks, tunnelling processes such as IPv4 over IPv6, VPN, and IPIP sit in the communication path.
This product has been designed to deliver high throughput even under these realistic operating conditions, and the measured figures are as follows.
We have secured this performance on the principle that there is little point speeding up the line itself if the router ends up becoming the bottleneck.
SFP / SFP+ modules are not included. Please prepare a compatible module according to your line and connected equipment. Genuine ZUNDA modules are available from Amazon.co.jp or our retailers.
Yes, you can use it without any issue. The communication module fitted in this product, including its antenna, has obtained technical regulations conformity certification (commonly known as Giteki) under the Radio Act, and this product is implemented exactly according to the certified design conditions. This means you can use the product as-is within Japan. Please check the unit's label for the technical regulations conformity certification number.
The service configuration and delivery format can be discussed according to your needs. Customisation of the device and the applications installed on it is also possible.
Please get in touch with us to discuss your idea first.
We have a distribution channel for resellers. Daiwabo Information System Co., Ltd. is currently our distributor.
We can provide implementation support, technical support, and demo unit loans for retailers. Please contact us via the form below for more details.
Yes. We plan to continue improving and adding features. The roadmap includes items such as the following.
These will be rolled out progressively as software updates. We are also happy to discuss individual customisation requests.
Zero setup cost15,000 JPY/month
No minimum contract period
Includes equipment replacement in case of failure, cloud management features and updates